Rebounce Recovery Card Recovery-modes

Data recovery command is to make the protected hard disk data recovery to the status that you first install the recovery card or the status you latest update your HD data. Any changes baseing on the two statuses above will be cleaned up. 

There are 3 options: the default one is Auto.

Auto: When select Auto command, you can set Auto recovery time in item Auto recovery __ day(s)

For example, the set interval is one day, and the last time to set system parameters is 8:00 in the morning, then, recovery card will recover the data with a ringing on 8:00 every day. The longest recovery time is 99days. The set interval is 0 day, protected data will be automatically recovered every boot.

Manual: Protected data will not be recovered until you want when the hot keys screen appears, press Ctrl+W, only then, data could be recovered.

None: Select none command, data changes will not be recovered until the recovery mode changed.

General operators such as students are recommended to use this mode, all useful data files or programs set to be protected will be protected under this mode.

Notice: IF the interval you set is 0 day, all modification of the protected mode will be recovered, if it is during the interval or recovery with manual, the system will not recover the content in protected partition and keep the current HD data as before. But system will just keep the current HD temporarily. If the data recover or data update command is run, the system will recovered to the state when you first install recovery card or the state you last update.

If this option is chosen, it seems as if the recovery card is not installed, and recovery card will not protect the system.